Seed

Germination rate

The share of seeds that sprout under test conditions, printed on the seed label.

Germination is tested in a laboratory under ideal conditions. The figure on the seed label — typically 85–98 % for cereal seed — is the starting point for the seed rate calculation. Field emergence will be lower. Never use a germination figure older than one season; retesting is cheap and saves over-ordering.

Typical germination rates by crop

CropMinimum (certified)Typical commercialNotes
Winter wheat 85% 90–98% ISTA standard: 90% minimum for certified seed
Spring barley 85% 90–97% Malting barley: higher standard often required
Oilseed rape 80% 85–95% Small seed; very sensitive to seedbed conditions
Maize 90% 92–98% Precision-seeded; single seed placement critical
Potato (seed) N/A 95–100% Vegetative propagule — all viable tubers sprout

How to read your seed certificate

Every bag of certified seed sold in the UK must be accompanied by an official seed certificate (or a label with certificate details). Key values to find: Germination % — the declared germination from the most recent test; Test date — the date the test was conducted; TGW (thousand grain weight) — seed size in grams; Variety — must match the approved variety list for any quality assurance or scheme requirements.

If the test date is more than 6 months old, or the seed has been stored in variable conditions, request a retest or have the seed retested before use. FERA seed certification ↗ maintains UK seed certification records. The TGW glossary entry explains how to use the TGW from the certificate in your seed rate calculation.

Germination in the seed rate formula

Germination percentage is the denominator multiplier in the seed rate calculation alongside field emergence: Seed rate (kg/ha) = Target plants/m² × TGW(g) ÷ (Germination% × Field emergence%) × 100. A 5% error in germination (using 95% when the true figure is 90%) increases required seed rate by 5.6% — approximately 10–12 kg/ha on a typical cereal crop. Over multiple fields or seasons, using the correct certificate germination value rather than a default prevents both undersowing and unnecessary seed expenditure. See the seed rate glossary entry for the full calculation and the wheat establishment guide for population targets.

Frequently asked questions

What is the minimum germination rate for certified cereal seed in the UK?
The minimum germination standard for certified cereal seed in the UK (and EU under ISTA rules) is 85% for wheat and barley, 80% for oats. Seed lots below minimum standard cannot be marketed as certified seed. In practice, most seed lots offered for sale exceed the minimum — typical wheat lots achieve 92–98%. The germination figure on the seed certificate is the legally declared value from the most recent laboratory test. FERA seed certification ↗ and the UK Official Seed Testing Station ↗ administer UK seed certification. See also the seed rate glossary entry for how germination feeds into the seed rate calculation.
How is germination rate tested in a laboratory?
Laboratory germination is tested according to ISTA (International Seed Testing Association) rules ↗. For cereals, typically 400 seeds are counted from the lot (4 × 100 seeds), placed on filter paper or sand at the prescribed temperature (20–25 °C depending on species) and counted at set intervals (first and final count vary by species — typically 4 and 8 days for wheat). Normal seedlings are counted; abnormal seedlings (deformed, stunted, rotten) and ungerminated seeds are recorded. The result is expressed as a percentage of normal seedlings from seeds placed.
Should I retest old seed before drilling?
Yes — germination falls over time, particularly if seed has been stored in poor conditions (variable temperature, high humidity). Seed carried over from the previous season should be retested before calculating seed rate. A fresh laboratory test costs approximately £15–25 and takes 7–14 days — order the test 3–4 weeks before you need the result. The cost of retesting is trivial compared to the cost of undersowing a field or purchasing excess seed based on an inaccurate germination figure. NIAB seed quality testing ↗ and accredited seed testing laboratories offer rapid turnaround germination and vigour tests.
What is the difference between germination and emergence?
Germination (laboratory) is the percentage of seeds that produce a normal seedling under ideal, controlled conditions. Emergence (field) is the percentage of seeds sown that establish as plants in actual field conditions. Field emergence is always lower because it includes additional losses from slug damage, soil compaction, disease, poor seedbed contact and temperature stress — none of which are present in a lab test. See the field emergence glossary entry for typical values and the factors that reduce establishment below the germination figure on the label.
What is seed vigour and how does it differ from germination rate?
Germination rate measures whether seeds can germinate under ideal conditions. Seed vigour measures the speed and uniformity of germination under sub-optimal stress conditions — cold soil, compaction, moisture deficit — that better predict field performance. A seed lot can have 95% germination but low vigour if seeds were slow to germinate in the lab or came from stressed parent plants (drought-stressed or late-harvested). Vigour tests include the cold germination test (7 °C for 7 days then transferred to 20 °C), Tetrazolium (TZ) test, and electrical conductivity test. NIAB seed quality guidance ↗ covers vigour testing services. See also the seed size and crop establishment article.