Grain moisture

Harvest Unit: % wet weight basis

The water content of grain as a share of its weight. It decides when to harvest and how safely grain stores.

Combine harvesters work best between 18–22 % moisture for cereals. Above 25 % the grain is too wet to thresh cleanly; below 14 % it is ready for safe long-term storage without drying. Measure with a calibrated meter, not by feel — a 1 % moisture error across a large store can mean significant spoilage.

Storage targets: AHDB grain storage moisture guide. Harvest research: Cereal Chemistry (2026) — high-moisture harvest effects.

Moisture content reference bands

Too wet to combine Threshing losses, grain damage
> 22 %
Combine window Acceptable with good settings
18–22 %
Ideal for combining Best quality, lowest losses
14–18 %
Safe for storage No drying needed for short-term
< 14 %
Long-term storage Wheat: 12.5 %, barley: 14 %
≤ 12.5 %

Cereals (wheat/barley). Source: AHDB.

Why it matters

Moisture decides harvest timing and storage safety.

Harvesting too early (above 22 %) increases grain damage and drying costs. Harvesting too late (below 14 %) risks weather damage and shedding losses. The sweet spot is 15–18 % — low enough for efficient combining, high enough that the crop hasn't been sitting in the field drying on the straw and losing quality.

Grainrus harvesting guidance notes that optimal harvesting is during dry weather at 20–25 °C when grain moisture is declining naturally — this is the window when weather and moisture both align.

Drying and storage

Know your drying cost per point.

Each percentage point of moisture removed costs approximately £2–4/tonne in the UK depending on fuel prices and dryer type. A crop harvested at 20 % and dried to 14 % costs roughly £12–24/tonne to dry. Tracking moisture before harvest helps you plan dryer schedules and avoid bottlenecks at peak harvest.

FAO grain drying and storage chapter covers low-temperature drying, batch drying and in-store conditioning for different cereal types and storage conditions.

FAQ

Frequently asked questions

At what moisture content is wheat safe to store long-term?
AHDB recommends drying wheat to 14 % moisture for short-term storage (up to 6 months) and 12.5 % for long-term storage (over winter). At moisture levels above 14.5 %, mycotoxin-producing fungi become active and grain quality can deteriorate rapidly.
How do I measure grain moisture in the field?
A calibrated hand-held grain moisture meter is the standard tool. For accurate readings, take samples from multiple locations across the load, allow the grain to equilibrate to ambient temperature (not direct sun), and clean the meter between samples. Check the meter calibration before harvest season — electronic meters drift over time.
What is the cost of drying grain per point of moisture?
Drying cost varies by fuel price and dryer efficiency, but a common UK rule of thumb is approximately £2–4 per tonne per percentage point of moisture removed. At high-moisture harvests (22 %+), drying costs can exceed £20/tonne — sometimes more than the value of selling early vs later.
Does harvesting at high moisture affect grain quality?
Yes. Research published in Cereal Chemistry (2026) found that early harvest at high moisture significantly increased water activity — raising microbial risk prior to drying. For milling wheat, specific weight (hectolitre weight) is also reduced at high moisture harvest, potentially causing downgrading.
What is the ideal harvest weather for cereals?
Dry, warm weather — 20–25 °C, with low relative humidity and light wind — allows grain to dry naturally in the field and reduces combine losses. Prolonged rain during the harvest window increases grain moisture daily, raises drying costs and increases the risk of sprouting (pre-germination) in late-maturing varieties.
How do growing degree days relate to harvest timing?
Maturity in winter wheat is typically reached at around 1,200–1,500 accumulated GDD (base 0 °C) from sowing. Once maturity is reached, moisture content depends on drying weather. Tracking GDD lets you anticipate when the crop will be ready so you can plan combine schedules, transport and grain reception.
What is grain chilling and when should I use it?
Grain chilling uses refrigerated air (typically cooled to 5–8 °C) to suppress insect activity, mould growth and respiration in stored grain. It is used when grain cannot be dried to safe moisture before storage — commonly after a wet harvest. Grain chilling is most cost-effective for bulk stored grain above 15 % moisture that will be sold within 3–6 months. Chilled grain at 15–16 % MC can be stored safely for several months, but it is not a permanent substitute for drying. The AHDB grain storage guides cover chilling as part of an integrated storage management approach.