Harvest

Potato Store Management

Potato Store Management guide.

  1. 1

    Prepare and audit the store before harvest to identify and fix issues

    Store audit before harvest entry is essential — problems discovered when the store is full are much harder to fix. The pre-harvest audit checklist: (1) Temperature sensor calibration — check all sensors against a calibrated reference thermometer; replace any with more than 0.5°C drift; (2) Fan performance — measure airflow delivery against rated specification; blocked ducts or damaged fan blades reduce airflow below the 0.06–0.1 m3/min/t minimum needed for effective temperature management; (3) Roof and wall insulation — identify and seal gaps allowing warm air ingress or cold air infiltration; (4) Door seals — replace worn or cracked door seals that allow uncontrolled air exchange; (5) Duct configuration — check that airflow distribution is even across the bay width; uneven distribution creates hot and cold spots. A store that enters harvest with known deficiencies will compound those deficiencies at scale.

  2. 2

    Manage the curing phase immediately after harvest to set skins and heal wounds

    Curing is the period immediately after harvest when temperature and humidity are maintained at elevated levels to promote wound healing and skin set. Target conditions: 12–15°C, 95% relative humidity for 10–14 days. Wound periderm (the healing layer) forms over mechanical damage sites during curing — reducing entry points for storage pathogens (Fusarium dry rot, silver scurf, black dot). Tubers harvested in hot, dry conditions (hard, set skins) require shorter curing periods than those harvested in cool, wet conditions (soft skins). After curing, reduce temperature gradually (0.5°C per day) towards the target storage temperature for the intended market. Rapid cooling post-harvest increases internal bruising risk.

  3. 3

    Achieve and maintain target storage temperature for the intended market

    Target storage temperature varies by market type — see the market targets table for specific figures. The key principles: (1) Cool the store to target temperature within 4–6 weeks of filling, using nocturnal ventilation (cool overnight air) where possible to minimise refrigeration energy cost; (2) Once at target temperature, maintain within ±0.5°C using controlled fan operation — avoid temperature fluctuations that cause condensation on tuber surfaces (condensation promotes silver scurf and other skin diseases); (3) Monitor with calibrated sensors at multiple heights and positions within the store — temperature gradients within a bulk store can exceed 3–4°C without adequate mixing airflow; (4) Record temperature and humidity data continuously — documentation supports quality assurance requirements for major retail and processor contracts.

  4. 4

    Apply sprout suppressant at the appropriate time and using the appropriate product

    With CIPC (chlorpropham) withdrawn from the EU and UK market, the main sprout suppressant options are: (1) Maleic hydrazide (MH) — applied as a foliar spray 2–3 weeks before harvest, MH translocates to the tubers and provides extended sprout suppression (up to 6–9 months); requires application to a green, actively growing canopy; (2) Ethylene gas — applied in the store during the storage period; effective sprout suppressor but requires a sealed, gas-tight store; best suited to processing stores; (3) Essential oil products (spearmint oil, clove oil) — applied as hot fog in the store; shorter residual period than MH or ethylene, requiring repeated applications; (4) 1,4-DMN (1,4-dimethylnaphthalene) — a naturally occurring compound with sprout-suppression activity, used in some commercial systems. Temperature management (keeping the store at target temperature consistently) is the foundation on which all chemical sprout suppression rests — no sprout suppressant compensates effectively for inadequate temperature management.

  5. 5

    Monitor for storage diseases through the season and respond early to any spread

    Storage disease monitoring requires regular physical inspection of stored tubers — not just temperature and humidity data. Monthly sampling (removing and assessing 25–50 tubers from representative locations in the bulk) allows early detection of silver scurf development, dry rot spread, pink rot or bacterial soft rot. Key warning signs: (1) Condensation on tuber surfaces — indicates temperature fluctuation, promotes silver scurf; (2) Soft patches in the bulk or on individual tubers — indicates bacterial soft rot, potentially indicating wet areas from harvest damage or excessive free moisture; (3) White mycelium visible on tubers — could indicate dry rot (Fusarium) or skin spot; (4) Strong unpleasant odour — indicates bacterial breakdown, requires immediate investigation. Respond to early signs with targeted ventilation adjustment, temperature correction or, if a specific disease is confirmed, consultation with an agronomist on options for the remainder of the season.

Market Temperature Humidity Notes
Pre-pack / retail 4–6°C 95–98% Cold storage minimises weight loss and skin discolouration; avoid temperatures below 4°C for chipping varieties (cold sweetening)
Processing (crisp) 8–10°C 95–98% Cold sweetening is critical issue — maintain >8°C to limit fructose accumulation; affects colour and acrylamide in processing
Processing (frozen chip) 6–8°C 95–98% Less cold sweetening sensitive than crisps but monitor for internal browning; maintain humidity to prevent weight loss
Seed 3–4°C 90–95% Low temperature suppresses sprout growth; allow warming before grading to avoid skin damage; check virus and disease status
Stock feed 5–8°C 90–95% Wide temperature tolerance; priority is preventing freeze damage and minimising rot spread

All figures: typical targets / specialist agronomic advice may differ. Verify with contract specifications.

Why store management matters as much as growing the crop

A potato crop that achieves 60 t/ha in the field can lose 10–15% of its value in store through weight loss, disease spread, sprout growth or quality downgrade — effectively the same commercial impact as a 6–9 t/ha yield reduction in the field. For growers supplying retail or processing contracts with strict quality specifications, store management is inseparable from the production system. The investment in store infrastructure, monitoring equipment and management expertise directly protects the financial value of the crop.

Store management is also the final opportunity to compensate for field problems: a crop harvested with some mechanical damage or marginal disease levels can still meet contract specifications if curing, temperature management and disease monitoring are executed well. Conversely, even a high-quality crop at harvest will underperform if store management allows temperature instability, condensation or uncontrolled sprouting.

Cold sweetening: the critical temperature threshold for processing

Cold sweetening is the most commercially significant store management issue for processing potato varieties. When tubers are stored below the critical temperature threshold for the variety (typically 6–8°C for crisping varieties), starch is converted to reducing sugars (glucose and fructose). Reducing sugars react with amino acids during high-temperature cooking (Maillard reaction) to produce dark colour and elevated acrylamide levels — both of which cause processing rejections. The threshold varies by variety — check AHDB variety-specific cold sweetening ratings before setting storage temperature. See the potato variety review 2030 article for current variety cold sweetening data.

Reconditioning: recovering from cold sweetening

Tubers that have accumulated reducing sugars through cold storage can be partially reconditioned by raising the storage temperature to 10–15°C for 4–6 weeks before processing — allowing starch synthesis to convert the sugars back. Reconditioning is a useful tool but is not fully reliable: the effectiveness depends on variety, duration of cold exposure and the degree of sweetening. It also carries the risk of increased respiration losses and accelerated sprouting. Reconditioning should be seen as a remedial option, not a planned strategy — optimising storage temperature from the outset is always preferable.

Frequently asked questions

What temperature should I store potatoes at for the supermarket pre-pack market?
Pre-pack retail potatoes should be stored at 4–6°C with relative humidity of 95–98%. This temperature range minimises weight loss, controls sprouting and maintains skin and flesh quality. Below 4°C, some varieties (particularly chipping varieties like Maris Piper) are susceptible to cold sweetening — the conversion of starch to reducing sugars at low temperatures — which causes dark chips and elevated acrylamide levels in cooking. Retail pre-pack contracts typically specify temperature performance requirements and may require continuous temperature data logging as part of quality assurance. See the potato variety review 2030 article for variety-specific susceptibility to cold sweetening.
What are the CIPC alternatives for potato sprout suppression?
Following the withdrawal of CIPC (chlorpropham), the main registered sprout suppression options in the UK are: (1) Maleic hydrazide (MH) — foliar application 2–3 weeks pre-harvest to green canopy; provides 6–9 months suppression in tubers; cannot be applied post-harvest; (2) Ethylene gas — applied in store throughout storage period; effective and persistent but requires gas-tight store; (3) Essential oils (spearmint, clove) — hot fog application in store; shorter residual, requires repeated applications; (4) 1,4-DMN — naturally occurring compound, applied in store; (5) Orange oil (limonene) — used in some organic systems. No single product fully replicates CIPC — most commercial operations now use a combination approach (MH pre-harvest + ethylene or essential oils in store). Temperature management is the essential foundation. See the Potato Industry Conference 2029 for the latest research.
How do I calculate the ventilation requirements for my potato store?
Ventilation (airflow) in a potato store serves two functions: (1) Heat removal — removing metabolic heat (potatoes respire and generate heat, approximately 15–25 W/tonne); (2) Gas exchange — removing CO₂ and maintaining adequate O₂. The minimum airflow requirement for adequate temperature management is 0.06–0.1 m³/min/tonne (cubic metres per minute per tonne of potatoes stored). For a 1,000 tonne store: minimum fan capacity = 60–100 m³/min. The actual requirement depends on: harvest temperature (hot harvest requires higher initial cooling airflow); insulation quality (poorly insulated stores need more airflow to compensate for heat gain); and refrigeration (refrigerated stores can use lower airflow). Duct design must ensure even airflow distribution — see AHDB's potato store design guidance for duct sizing calculations. AHDB Potatoes ↗ provides detailed store design resources.
What causes silver scurf and how do I prevent it spreading in store?
Silver scurf (Helminthosporium solani) is a surface blemish disease affecting pre-pack and seed potatoes — it does not cause tuber rot but causes skin discolouration (silvery patches) that downgrade or rejects retail pre-pack tubers. The fungus spreads rapidly in store under humid conditions, particularly with temperature fluctuations that cause condensation on tuber surfaces. Prevention: (1) Avoid harvesting from infected seed lots; (2) Maintain stable storage temperature (avoid fluctuations >0.5°C); (3) Prevent condensation by avoiding rapid temperature changes; (4) Maintain adequate airflow to remove surface moisture; (5) Fungicide seed treatments (thiabendazole, fludioxonil) reduce but do not eliminate seed-borne infection. Once established in store, silver scurf cannot be eliminated — damage limitation through temperature stability is the primary tool.
How long can potatoes be stored successfully?
Storage duration depends on variety, market, condition at harvest and store management quality: (1) Processing (crisp) varieties: typically stored 8–10 months (harvest July–August to May–June); high-dry-matter varieties are more stable in long-term storage but cold sweetening must be managed; (2) Pre-pack retail: typically 4–8 months; quality deteriorates more rapidly than processing due to more demanding appearance standards; (3) Seed potatoes: typically 6–8 months; perishability is managed by temperature and physiological age management; (4) Organic potatoes: typically shorter storage periods as CIPC alternatives provide less reliable suppression. In all cases, condition at harvest is the dominant factor — tubers with significant mechanical damage, disease infection or wet surfaces at harvest will not store as well as clean, dry, undamaged crops regardless of store management. See the potato variety review 2030 article for variety-specific storage performance data.