Grow

Tomato Growing Guide

Tomato Growing Guide guide.

5 min read · Crops:

Protected versus outdoor production

The UK tomato market is dominated by protected cropping — glasshouse and polytunnel production — because the outdoor climate is too cool and variable for reliable commercial yields across most regions. The UK produces approximately 100,000 tonnes of tomatoes annually, almost all under glass or polythene. Protected production allows year-round extension with heating, hydroponic substrate culture and precise environmental control.

AHDB Horticulture ↗ and the Horticultural Development Company (HDC) ↗ are the primary UK research and guidance sources for commercial protected cropping. The NIAB vegetable variety evaluation programme ↗ publishes annual performance data for UK-evaluated tomato varieties.

Five management steps from transplant to harvest

  1. 1
    Establish transplants at correct temperature

    Tomatoes require soil and air temperatures above 15 °C for active root growth and above 10 °C for pollen viability. Transplants should be hardened off gradually before planting into the final growing environment. In glasshouse production, plant into heated media when day temperatures are sustained above 18 °C and nights above 12 °C. Direct outdoor planting in the UK is only viable in southern regions from late May — frost risk must be zero. Transplanting at the wrong stage (too small or too large) sets back establishment and delays flowering.

  2. 2
    Manage temperature and ventilation

    In protected cropping, day temperatures should be 20–25 °C and nights 15–18 °C during the growing season. Above 30 °C, pollen viability falls sharply causing fruit set failure. Ventilate to control humidity below 85% RH to reduce Botrytis and powdery mildew risk. Use shading or whitewash on glasshouse glass from June onwards to prevent heat stress. Consistent temperature management prevents physiological disorders such as blossom end rot (linked to calcium uptake limitation) and blotchy ripening.

  3. 3
    Deliver precise nutrition and irrigation

    Tomatoes have high nutrient demand — typical crop nutrient offtake for 50 t/ha yield includes approximately 250 kg N, 60 kg P₂O₅ and 500 kg K₂O per ha. For hydroponic or substrate growing, use an EC-adjusted nutrient solution (target EC 2.5–4.0 mS/cm depending on stage). In soil-grown crops, apply nitrogen and potassium in multiple splits matched to growth stage. Potassium demand peaks at fruit fill. Calcium deficiency causes blossom end rot — maintain Ca:K ratio in solution and avoid water stress that limits Ca uptake. See the <a href="/glossary/npk">NPK glossary entry</a> for nutrient conversion context.

  4. 4
    Manage pollination and fruit set

    In protected crops, natural pollination is unreliable due to still air and controlled environments. Pollination is achieved by bumblebees (Bombus terrestris) in commercial glasshouses, or by mechanical vibration (electric pollinators) in smaller structures. Introduce bumblebee hives at first flower; replace hives when activity declines. Maintain temperatures within the optimal pollen viability range (18–26 °C) during flowering. Poor pollination produces misshapen, cat-faced or zoning-affected fruit that reduces packout grade.

  5. 5
    Monitor and manage Botrytis and late blight

    Botrytis cinerea (grey mould) is the most significant disease risk in protected tomato crops — it infects through wounds, dead tissue and flowers, spreading as grey spore masses. Manage through ventilation to reduce humidity, prompt removal of dead tissue, and fungicide programmes using products with FRAC group rotation (cyprodinil + fludioxonil; Switch; products containing boscalid). Late blight (Phytophthora infestans) is primarily a risk in outdoor or poorly ventilated crops. See the <a href="/news/blight-forecast-potato-2026">blight forecast article</a> for late blight identification and model context.

Integrated pest management in protected tomatoes

Commercial glasshouse tomato production relies heavily on biological control — the enclosed environment allows effective deployment of predatory insects and mites that cannot be used outdoors. Koppert ↗ and Biobest ↗ are the dominant biological control suppliers. Key biocontrol agents include: Encarsia formosa and Eretmocerus eremicus for whitefly; Phytoseiulus persimilis for two-spotted spider mite; Amblyseius cucumeris for thrips; Steinernema feltiae (nematodes) for fungus gnats. Pesticide selection must be compatible with biocontrol agents — check Koppert side-effects database ↗ before applying any chemistry.

For nutrient management context, see the NPK glossary entry and the irrigation scheduling guide for water and nutrient delivery principles that apply across crop types.

Frequently asked questions

What is the optimal growing temperature for tomatoes?
Day temperatures of 20–25 °C and night temperatures of 15–18 °C are optimal for growth and fruit development. Above 30 °C, pollen is damaged and fruit set fails. Below 10 °C, root activity and nutrient uptake slow significantly. AHDB Horticulture ↗ and the Horticultural Development Company (HDC) ↗ publish temperature management data for UK protected cropping. For outdoor tomatoes, the UK climate limits production largely to southern England without additional protection.
What causes blossom end rot in tomatoes?
Blossom end rot (BER) is a physiological disorder caused by calcium deficiency in the developing fruit, not by a pathogen. Calcium is not mobile in plants — it moves via the transpiration stream in xylem, not phloem. Any factor that restricts transpiration or water uptake limits calcium delivery to the actively growing fruit end. Common causes: water stress, excessive nitrogen (especially ammonium-N), high humidity reducing transpiration, root restriction or damage. Management: maintain consistent soil/substrate moisture, use calcium nitrate as the N source, avoid over-fertilisation with K or Mg which competitively inhibit Ca uptake. HDC guidance ↗ covers BER management in UK commercial production.
How do I manage Botrytis in a glasshouse tomato crop?
Botrytis (grey mould) management is primarily cultural: maintain RH below 85% through ventilation; remove dead leaves, flowers and damaged fruit promptly; ensure clean cuts when pruning (Botrytis enters through wounds); avoid overhead watering. Chemical control uses protectant fungicides on a 7–10 day programme — rotate between FRAC groups to prevent resistance development. FRAC group codes ↗ apply equally to horticultural fungicides. Biopesticide options (Trichoderma-based, Bacillus subtilis) can be integrated into programmes. HDC ↗ and AHDB Horticulture ↗ provide product recommendations and resistance management guidance.
What is the role of bumblebees in tomato pollination?
Tomato flowers require vibration to release pollen — a process called buzz pollination (sonication). Bumblebees (Bombus terrestris) are the preferred pollinator in commercial glasshouses because they generate the correct vibration frequency by rapidly contracting flight muscles. Each queen-right hive can pollinate approximately 500–800 m² of cropping area. Hive performance should be monitored weekly; replace hives when activity declines or when population pressure (varroa, disease) is observed. Biobest ↗ and Koppert ↗ are the main commercial suppliers of biological pollination systems in the UK.
How much water do glasshouse tomatoes need?
Water demand varies with solar radiation, temperature, plant size and stage. In full production in summer, crop water demand can reach 2–4 L/plant/day. Drip irrigation with moisture sensors or flow-tracking is standard in commercial operations. Substrate growing (rockwool, peat, coir) typically targets a drainage fraction of 25–35% to maintain substrate EC and oxygenation. Deficits during fruit fill cause BER, fruit cracking and irregular ripening; over-irrigation dilutes nutrient concentration and increases Pythium root disease risk. See the irrigation scheduling guide for the SMD and ET₀ framework that underpins field irrigation — similar principles apply to protected crop water management.