Protect

Barley Disease Management

Barley Disease Management guide.

5 min read

Key barley diseases: risk, timing and mode of action

DiseasePathogenRisk levelKey timingMode of actionNotes
Rhynchosporium Rhynchosporium commune Very high T1 (GS31–32) SDHI + azole, prothioconazole Primary UK spring and winter barley disease in wet seasons
Net blotch Pyrenophora teres High T0–T1 (early) Azole (prothioconazole), SDHI Seed-borne; worse on stressed crops; two forms (net and spot)
Powdery mildew Blumeria graminis f.sp. hordei High (variety-dependent) T0/T1 (if active) Morpholine (spiroxamine), quinoxyfen, SDHI Spring barley especially vulnerable early season
Brown rust Puccinia hordei Medium T1/T2 if active Azole, SDHI Warm dry seasons; variety ratings vary widely
Ramularia leaf spots Ramularia collo-cygni Medium–high (late season) T2/T3 (flag leaf, ear) Folpet (multisite), SDHI co-application Resistant to SDHIs; multisite remains key management tool
Fusarium root rot Fusarium spp. Low–moderate (seedling risk) Seed treatment Fludioxonil, tebuconazole seed treatment Soil-borne; worsened by wet cold soils at drilling

Step-by-step fungicide programme for barley

  1. 1

    Assess varietal disease risk and season type before committing to a programme

    Barley disease programmes must be tailored to variety and season type. The AHDB Recommended List provides disease ratings for rhynchosporium, net blotch, mildew and brown rust for all recommended varieties — rated 1–9 (9 = most resistant). A variety rated 3–4 for rhynchosporium in a wet spring justifies a more robust T0/T1 programme than one rated 7. Winter barley programmes start earlier (T0 at GS25–30 is more commonly justified than in spring barley) and must account for the longer growing season and additional disease exposure windows. Spring barley programmes are typically simpler — T1 at GS31–32 plus an optional T2 for two-row malting crops — but mildew risk in early spring can justify a T0. Build a risk assessment based on variety ratings, previous cropping history (wheat-on-barley can carry some shared diseases), drilling date and regional weather patterns before finalising programme design.

  2. 2

    Apply a T0 (GS25–30) where early mildew or net blotch risk justifies the cost

    A T0 application in barley is more commonly warranted than in wheat — particularly for mildew-susceptible spring barley varieties where early mildew infection can suppress tiller development. T0 in winter barley is justified when rhynchosporium is already active in the lower canopy (check after wet periods from January onwards) or when the crop has low resistance ratings. T0 products are typically azole-based with morpholine or quinoxyfen for mildew — lower-cost formulations keep the programme economical. Net blotch can spread rapidly from infected debris in the soil; early applications at GS25 can help manage this. Avoid sole azole applications at T0 where rhynchosporium pressure is high — this will select for reduced sensitivity in the population. Including a multisite at T0 (folpet) is good resistance management practice even at this early timing.

  3. 3

    Prioritise T1 (GS31–32) as the most critical single application

    T1 at GS31–32 is the most important timing for rhynchosporium and net blotch control in barley. The application protects leaf 3 and sometimes leaf 2, covers the critical stem extension window, and establishes a clean canopy before flag leaf emergence. SDHI + azole (bixafen + prothioconazole, benzovindiflupyr + prothioconazole) applied at full label rate provides the most robust protection at T1. For crops with high mildew susceptibility, include a mildew-specific active (spiroxamine, quinoxyfen) — SDHIs and standard azoles alone are insufficient against mildew in susceptible varieties. Add folpet as a multisite at T1 for resistance management. Timing is critical: applications before GS31 leave leaf 3 unprotected post-emergence; applications after GS33 miss the leaf 3 window.

  4. 4

    Apply T2 (GS37–39) to protect flag leaf in malting barley and high-disease-risk crops

    A T2 application at flag leaf is standard practice for malting barley (the flag leaf contributes significantly to grain protein and starch quality as well as yield) and justified for feed barley crops with high disease ratings in wetter seasons. T2 protects the flag leaf from rhynchosporium, brown rust and ramularia. Ramularia becomes more important at this timing — it spreads in the canopy under conditions of plant stress and is largely resistant to SDHIs. Folpet (multisite) at T2 provides the most reliable ramularia activity currently available. A standard SDHI + azole + folpet programme at T2 covers all the main late-season diseases. For two-row spring malting barley, T2 timing must be precise: flag leaf fully emerged (GS37) but ear not yet visible (before GS45). Specific weight and malting quality are both strongly influenced by flag leaf health in the final 6 weeks before harvest.

  5. 5

    Monitor for ramularia and late-season disease after ear emergence

    Ramularia leaf spots can appear from ear emergence onwards, typically triggered by environmental stress — high UV radiation, drought followed by wet conditions, or very cool nights. The lesions (rectangular bleached spots with dark borders, usually visible on flag leaf and leaf 2) can be confused with physiological leaf spots or herbicide effects. The critical management point is that ramularia is largely SDHI-resistant, so a T2 application with SDHI alone will not prevent late-season ramularia development. Folpet at T2/T3 is the best available tool. Variety resistance ratings for ramularia are available from AHDB but have historically had poor predictive value in the field. Where ramularia is consistently problematic on farm (particularly on lighter soils in drier eastern regions), building folpet into the T1 and T2 applications is recommended as a programme design principle rather than a reactive decision.

Resistance management in barley fungicide programmes

SDHI resistance in barley pathogens is a serious and growing concern — particularly in Rhynchosporium commune and Ramularia collo-cygni. FRAC monitoring data shows declining SDHI sensitivity in UK rhynchosporium populations, and ramularia is already functionally resistant to the SDHI class. The resistance management principles are: use mixtures of fungicides with different modes of action at every timing; include multisite fungicides (folpet) as a standard component of T1 and T2; apply at full label rates; and rotate FRAC groups between T1 and T2 where the programme length allows. Avoid repeated use of the same SDHI active at T1 and T2. See the fungicide resistance management guide for the full stewardship framework.

Variety disease ratings from the AHDB Recommended List ↗ are the starting point for all programme design decisions in barley — just as they are in wheat. The comparison between barley and wheat disease programmes is explored in the wheat disease management guide.

Frequently asked questions

Is barley disease management fundamentally different from wheat?
Yes — barley has a different disease spectrum, different fungicide sensitivities, and different programme logic from wheat. The dominant barley diseases are rhynchosporium and net blotch, not septoria as in wheat. Both are favoured by wet, cool conditions and have significant splash-dispersal components, but they differ from septoria in their earlier-season importance and their different responses to fungicide classes. Ramularia is a barley-specific late-season disease with no wheat equivalent — and it is largely resistant to SDHIs, the dominant fungicide class in modern programmes. Mildew is more damaging in barley than wheat, particularly in spring barley at early growth stages. The result is that barley programmes often justify a T0 more readily than wheat, and must integrate multisite fungicides (folpet) specifically for ramularia resistance management. See the wheat disease management guide for comparison.
What is rhynchosporium and how does it spread?
Rhynchosporium (caused by Rhynchosporium commune) is the most damaging foliar disease of barley in the UK under wet, cool conditions. It is a rain-splashed disease — spores are released and dispersed during rainfall events — and infects leaves through the stomata with a latent period of 7–14 days before symptoms appear. Symptoms are classic 'blotch' lesions: irregular, pale grey-tan lesions with dark margins. Inoculum sources include infected crop debris from the previous season, volunteer barley, and infected seed (though seed-borne infection is a minor pathway compared to stubble-borne). Disease spreads most rapidly in cool (8–15°C), wet weather in April–May — exactly the typical UK spring barley growing conditions. Varieties with low rhynchosporium resistance ratings (below 5 on the AHDB RL) are particularly vulnerable in high-pressure seasons. See the leaching glossary entry for discussion of how soil conditions in wet springs interact with disease pressure.
How is ramularia different from other barley diseases and why is it difficult to control?
Ramularia collo-cygni is unique among barley diseases in two ways: it is endophytic (lives inside the plant asymptomatically for most of the growing season, only becoming visible as symptoms under stress conditions), and it has developed high-level resistance to SDHIs through rapid evolution following the introduction of SDHI fungicides. Symptoms — rectangular bleached lesions with dark borders, typically appearing from GS61 (ear emergence) onwards — are triggered by environmental stresses including UV light, drought, temperature fluctuation and nutritional stress rather than by simple infection events. This means that standard preventative fungicide timing logic (apply before symptoms appear) is less effective than with splash-dispersed pathogens. The only currently effective tool is folpet (a multisite), which has no known resistance mechanism in Ramularia. SDHI-based programmes can intensify ramularia pressure by removing competition from more SDHI-sensitive pathogens.
Is a T2 fungicide application justified for feed barley?
T2 for feed barley is often justified but requires a case-by-case cost-benefit assessment. The decision factors are: (1) Disease ratings — a variety with rhynchosporium rating of 4 or below in a wet May–June season justifies T2; (2) Crop yield potential — a 7–8 t/ha feed barley crop has enough yield potential to justify flag leaf protection; (3) Input cost relative to expected yield response — in a very dry season with low disease pressure, a T2 in feed barley may cost more than the yield response justifies. AHDB crop protection research data consistently shows that T1 alone provides approximately 60–70% of the achievable fungicide response in barley; T2 captures the remaining 30–40% in high-pressure seasons. The threshold for omitting T2 in feed barley is therefore: low-risk variety (rating ≥7) + dry spring + late drilling date + low inoculum history. In average-risk conditions, T2 in feed barley is economically positive at prevailing barley and fungicide prices.
What seed treatments are available for barley diseases?
Seed treatments are the primary management tool for net blotch (seed-borne Pyrenophora teres), leaf stripe (Rhynchosporium commune seed-borne component), covered smut (Ustilago hordei) and fusarium root rot seed-borne inoculum. The standard barley seed treatment active ingredients include: fludioxonil (broad-spectrum fungicidal, excellent against smuts and net blotch); tebuconazole (azole, net blotch and leaf stripe); prothioconazole (azole, broad-spectrum). Combination products typically include two or three actives. For purchased seed, confirm the seed treatment applied by the merchant — some lots may only have a basic treatment. For farm-saved seed, seed testing for germination and disease levels is strongly recommended before applying a treatment. The wheat establishment guide covers the general seed treatment decision framework applicable across cereals.