Protect

Integrated Pest Management Cereals

Integrated Pest Management Cereals guide.

5 min read · Crops:

Key cereal pests and action thresholds

PestAction thresholdKey timingNote
Aphids (BYDV vectors) Autumn: 50% of tillers colonised at GS12–13; spring: 66% October–November; April–May Threshold varies with temperature — warm autumns raise risk
Orange blossom midge 1 egg/ear during GS55–59 (ear emergence) June–July Monitoring via pheromone trap essential
Wheat blossom midge 5 females/m² at ear emergence June–July Variety resistance is first line of defence
Saddle gall midge 1 larvae/stem at GS31 March–April Economic impact varies widely — threshold controversial
Leatherjackets 0.5–1 per 900 cm² (10×10 cm sample) Autumn after grass Higher risk after ploughing grassland or after wet September
Frit fly (oats/maize) Any detection in vulnerable crops April–June Cultural control (early drilling, late grass ploughing) most effective

Five-step IPM programme

  1. 1
    Monitor and record pest populations

    The foundation of IPM is field-specific data. Establish a monitoring calendar for each field: aphid counts on tillers in autumn and spring; yellow sticky trap monitoring for midges from GS31; pheromone traps for orange blossom midge from GS45; leatherjacket soil sampling after ploughing grassland in autumn. Record all observations with date, field and growth stage. Without a monitoring record, decisions default to calendar-based insurance sprays — which is not IPM.

  2. 2
    Apply economic thresholds before treating

    Economic thresholds define the pest population level at which treatment cost is justified by crop protection benefit. Applying treatments below threshold uses chemistry unnecessarily and selects for resistance. AHDB publishes validated thresholds for all key UK cereal pests — use these as the minimum decision framework. In fields with high natural enemy populations (abundant ground beetles, parasitic wasps, spiders), population growth from below threshold is often suppressed by beneficials — factor this in before treating.

  3. 3
    Use cultural controls to reduce pest pressure

    Cultural controls are the non-chemical tier of IPM: (1) sowing date manipulation — late autumn sowing reduces exposure to peak aphid migration and BYDV risk; (2) variety choice — resistance ratings for BYDV tolerance, midge resistance and aphid resistance are on the AHDB Recommended Lists; (3) seedbed preparation — consolidated seedbeds reduce leatherjacket and slug establishment habitat; (4) crop rotation — breaking pest cycles through rotation disrupts build-up of soil-borne pests; (5) boundary and habitat management — wild flower margins support ground beetles, hoverflies and parasitic wasps that prey on pests.

  4. 4
    Support natural enemies and beneficial insects

    Natural enemy populations are a free pest control service that cultural and chemical interventions can support or destroy. Avoid broad-spectrum insecticides unless absolutely necessary — pyrethroid sprays at flowering kill pollinating insects and beneficial hoverflies as well as target pests. Insecticide-free field margins and beetle banks provide refuge and overwintering habitat for ground beetles and other beneficials. Monitoring natural enemy:pest ratios alongside pest counts provides the full picture needed for sound IPM decisions.

  5. 5
    Select insecticides with selectivity and resistance management

    When insecticide treatment is justified, select products with the greatest selectivity for the target pest and the least impact on non-target organisms. For aphid control, pirimicarb is significantly more selective than pyrethroids and should be preferred where it provides adequate control. Rotate modes of action across treatments and seasons to manage resistance risk. IRAC (Insecticide Resistance Action Committee) classifies insecticide modes of action — avoid using the same class repeatedly. Record all applications in your farm agronomy record.

Natural enemy conservation in cereal IPM

A functioning natural enemy complex is the most cost-effective pest suppression system in arable farming — and entirely free if management supports it. Key species to support:

  • Ground beetles (Carabidae): feed on aphids, slugs, fly larvae and weed seeds — see the slug management guide for their role in slug control
  • Parasitic wasps (Aphidiidae): primary parasitoids of grain aphid and bird-cherry aphid — check for mummified aphids (tan-coloured, papery) as evidence of parasitism before treating
  • Hoverflies (Syrphidae): larvae feed on aphid colonies; adults require pollen and nectar from flowers — wild flower margins directly support hoverfly populations
  • Ladybirds (Coccinellidae): both adults and larvae consume aphids at high rates; 7-spot ladybird (Coccinella 7-punctata) is the most common in UK cereal fields

GWCT beetle bank research ↗ provides the evidence base for beneficial insect habitat management. The AHDB IPM guidance ↗ includes a field margin and habitat management section.

IPM and insecticide resistance management

IPM is inseparable from resistance management. Every unnecessary insecticide application applies selection pressure for resistance in pest populations. The Insecticide Resistance Action Committee (IRAC) ↗ classifies insecticides by mode of action — rotating between classes is the primary resistance management tool alongside threshold-based decision making. For aphid control, using pirimicarb (Group 1A) rather than pyrethroids (Group 3A) in seasons where both are effective breaks pyrethroid selection pressure. See also the fungicide resistance management guide for parallel principles applied to disease control.

For the current season's pest pressure context, see the aphids and BYDV in autumn cereals article and the spring cereal disease forecast.

Frequently asked questions

What is the difference between IPM and conventional pest management?
Conventional pest management often applies pesticides on a calendar or precautionary basis, regardless of whether pest populations are present or above threshold. Integrated Pest Management (IPM) requires that any chemical intervention is justified by monitoring data showing pest populations above an economic threshold, that cultural controls have been considered first, and that the most selective treatment is chosen. AHDB IPM guidance ↗ provides the UK framework. Since 2023, IPM is a requirement for compliance with the UK Sustainable Use of Pesticides regulations, and is embedded in Sustainable Farming Incentive scheme conditions.
How do I monitor for aphids to assess BYDV risk?
Aphid monitoring for BYDV risk involves two stages: (1) autumn migration monitoring via yellow sticky traps — trap counts of grain aphid (Sitobion avenae), rose-grain aphid (Metopolophium dirhodum) and bird-cherry aphid (Rhopalosiphum padi) indicate peak migration pressure; (2) field tiller sampling — random counts of 50–100 tillers per field, recording the percentage colonised. Rothamsted Insect Survey ↗ publishes national aphid migration forecasts in real time. See the aphids and BYDV article for the full scouting framework.
Is pyrethroid resistance a concern in UK cereal aphids?
Yes — pyrethroid resistance is now widespread in grain aphid populations across the UK. The Rothamsted monitoring programme ↗ tracks resistance frequency annually. In many arable regions, kdr-type resistance to pyrethroids is present in >50% of grain aphid populations. This means a pyrethroid applied at label rate may give inadequate control even at threshold populations. Pirimicarb (organophosphate) remains effective where populations are below the resistance frequency threshold. Check current resistance data before relying on pyrethroids for aphid control.
What are beetle banks and why do they support IPM?
A beetle bank is a raised, undisturbed grass strip running across a field (or along its length in larger fields), seeded with tussock-forming grass species such as Dactylis glomerata (cocksfoot) and Holcus lanatus (Yorkshire fog). It provides overwintering habitat for ground beetles (Carabidae) and other beneficial invertebrates that are key predators of aphids, slugs and weed seeds in cereal fields. Game & Wildlife Conservation Trust beetle bank research ↗ shows that fields with beetle banks have significantly higher predatory beetle densities in the crop core during the growing season. Beetle banks count as habitat management in the SFI scheme.
How does crop rotation help with pest management?
Crop rotation is a powerful IPM tool because many soil-borne and root-feeding pests build up specifically under a host crop and decline rapidly in its absence. Key rotation effects: (1) cereal cyst nematode (Heterodera avenae) populations decline to low levels after one non-host year; (2) frit fly (Oscinella frit) populations associated with grass leys crash after the ley is ploughed and replaced with a non-grass crop for 2+ years; (3) wireworm populations associated with old grassland decline under continuous arable. See the crop rotation planning guide for the full rotation decision framework.
Do I need an IPM plan for the Sustainable Farming Incentive?
Yes — under the Sustainable Farming Incentive scheme ↗, having an integrated pest management plan is part of the baseline management requirements for scheme participants. The plan must document: monitoring procedures for key pests; economic threshold criteria; cultural controls in use; records of treatments applied and their justification. The AHDB IPM planning template ↗ provides a downloadable framework that meets the SFI evidence requirements.