Protect

Maize Weed Management

Maize Weed Management guide.

5 min read

Key weeds in UK maize crops

WeedTypeRiskEmergence timingNotes
Fat hen (Chenopodium album) Broadleaf High Emerged at drilling; flushes post-emergence Major competitive weed in maize; pre-emergence residuals are critical for control
Black nightshade (Solanum nigrum) Broadleaf High Late-emerging; warm soil germination Extremely competitive; late emergence can defeat post-em timing — multi-pass required
Common couch (Elymus repens) Grass Medium–High Rhizomes activated by cultivation Pre-harvest glyphosate or pre-crop stale seedbed treatment most effective
Annual grasses (e.g. Poa annua, Digitaria) Grass Medium Post-establishment flush Limited post-emergence grass weed options in maize — pre-emergence is key
Volunteer potatoes Broadleaf Medium Spring emergence from tubers Difficult to control with standard maize herbicides — mechanical or hand rogueing required in high-density situations

Step-by-step maize weed management programme

  1. 1

    Plan a stale seedbed or pre-crop treatment where weed pressure is high

    Maize is drilled late (late April–May) and grows slowly in cool, early-season conditions — this gives competitive weeds a significant head start. Where fields have a history of high fat hen, nightshade or grass weed pressure, a stale seedbed approach adds a layer of control before any herbicide programme. Prepare seedbed 3–4 weeks before drilling, allow a weed flush to emerge to the 2–4 leaf stage, then apply a non-residual herbicide (glyphosate at the appropriate rate) 7–10 days before drilling to destroy the germinated cohort. This removes the largest, most competitive weed individuals that would otherwise establish alongside the maize. For couch grass: apply glyphosate at full dose (3.0–3.6 kg ae/ha) in the growing season before drilling when couch is actively growing. Do not cultivate for 14 days after application to allow full translocation to rhizomes.

  2. 2

    Apply pre-emergence residual herbicides at drilling

    The pre-emergence programme is the foundation of maize weed management — it is more consistent and cost-effective than post-emergence correction. Apply pre-emergence products within 48 hours of drilling, before crop emergence. Key active ingredients: pendimethalin (controls annual broad-leaved weeds and some grasses), S-metolachlor (fat hen, annual grasses, nightshade), terbuthylazine (broad-leaved weeds — part of most standard maize mixes). Standard UK pre-em combinations: S-metolachlor + terbuthylazine ± mesotrione (e.g. Camix, Calaris type products). Ensure soil moisture is adequate for residual activity — products need to be activated by rainfall or irrigation within 7–10 days of application. Very dry conditions after drilling reduce pre-em efficacy significantly. Check label instructions for soil type restrictions — some products are restricted on sandy or low-OM soils due to leaching risk. Always comply with stewardship conditions on atrazine-replacement products.

  3. 3

    Time post-emergence herbicides to the crop growth stage

    Post-emergence applications in maize are most effective between crop emergence (V1–V2) and the 6–8 leaf stage (V6–V8) — after this, crop canopy closure provides sufficient competitive suppression. Apply when weeds are small (2–4 leaf) and growing actively. Key post-em options: mesotrione (broad-leaved weeds, some grasses), nicosulfuron (grass weed control, including volunteer cereals — check variety tolerance), bromoxynil (broad-leaved only, tank-mixed in early post-em programmes), tembotrione. Nicosulfuron has variety sensitivity — some maize varieties (particularly sweet corn) have reduced tolerance; always check the variety label before application. Do not apply post-em products when maize is under stress (cold nights below 8°C, drought) — spray damage risk increases significantly. Keep records of post-em applications including tank mix partners — nicosulfuron interactions with some insecticides (organophosphates) can cause severe crop damage.

  4. 4

    Use inter-row cultivation as a complementary cultural tool

    Mechanical inter-row cultivation between maize rows provides effective broad-spectrum weed control in the early post-emergence period and can reduce herbicide input in fields with high weed pressure or where residual products have underperformed. Row spacing of 75 cm (standard UK maize) allows a tined or disc cultivator to pass between rows from V2 to approximately V6. Cultivation at 4–5 cm depth destroys emerged weeds and stimulates the germination of a new weed flush — which can then be controlled by a post-em herbicide applied immediately after cultivation. Residual inter-row bands (applied by specialist banded sprayer simultaneously with cultivation) combine mechanical and chemical control in a single pass. Cultivation is not practical after V6–V8 due to root damage risk. In organic production, inter-row cultivation is the primary weed management tool — tractor-mounted rotary weeders at 5–7 day intervals from V2.

  5. 5

    Address problem weeds with targeted follow-up treatments

    Standard programmes do not control all weeds in all years. Common failure modes: late-emerging nightshade cohorts that escape the pre-em window; volunteer potatoes (require hand or mechanical rogueing); maize volunteers in subsequent crops (controlled easily with broad-spectrum grass herbicides); couch grass regrowth from deep rhizomes. For late-emerging broad-leaved weeds post-V6: very limited options — mesotrione can be applied up to V8 in most product labels. In high-pressure years, two post-em passes may be justified: first pass at V2–V3 targeting emerged weeds; second pass at V5–V6 for later flushes. Budget for a follow-up application in the programme — waiting until a problem develops and then applying in suboptimal conditions is consistently less effective than planned sequential treatment. Keep field-by-field weed maps — weed burden data across seasons enables programme optimisation and guides cover crop species selection (for weed suppression between seasons). See the <a href="/guides/cover-crop-mixtures">cover crop mixtures guide</a> for inter-season weed management context.

Herbicide resistance in maize weeds

Herbicide resistance in maize weeds is a growing concern in the UK. Fat hen populations with resistance to ALS-inhibitors (including mesotrione) have been confirmed in several UK counties — a consequence of multiple annual applications of the same mode of action. Black nightshade populations with triazine (terbuthylazine) resistance have been reported historically in continental maize-growing regions and are a potential risk in intensively-grown UK areas. The practical response: rotate pre-emergence herbicide modes of action where possible; do not rely on mesotrione alone as the post-emergence component; integrate cultivation to reduce selection pressure.

Good rotation design is the most durable tool — maize crops should ideally not follow maize in consecutive years on the same field. Cereal or legume rotations break the weed pressure cycle and allow different herbicide modes of action. See the cover crop mixtures guide for inter-season weed suppression strategies and the maize silage quality article for variety and management context.

Frequently asked questions

What are the most important weeds to control in maize and why?
Fat hen (Chenopodium album) and black nightshade (Solanum nigrum) are the most competitive and economically damaging weeds in UK maize. Fat hen: fast-growing, highly competitive for nitrogen and water; a single plant per m² can reduce yield by 5–10%; produces thousands of viable seeds per plant that persist in the seed bank for decades. Nightshade: similar competitive impact; grows in warm soils and flushes later than fat hen — often escaping a well-timed pre-em application if conditions turn dry after drilling. Grass weeds: couch grass is the most persistent competitive grass weed in maize; annual grasses (Digitaria, Poa) have fewer control options post-emergence than in cereals. Key principle: the competitive window for maize weed control is narrow — from drilling to V6 (6-leaf stage). Weeds established before V6 have disproportionate yield impact because they compete during the critical early canopy development phase. See the maize agronomy guide.
Which pre-emergence products are most effective in maize?
The most widely used pre-emergence active ingredients in UK maize are: (1) S-metolachlor (Dual Gold type) — controls fat hen, nightshade, annual grasses, some amaranthus; requires good soil moisture for activation. (2) Pendimethalin — broad-leaved weeds and annual grasses; physically mixed into the surface soil layer. (3) Terbuthylazine — triazine herbicide with good fat hen and broad-leaved activity; restricted to 500 g ai/ha/season; combined with S-metolachlor in most ready-mixed products. (4) Mesotrione (HPPD inhibitor) — can be used pre- or early post-em; good on fat hen, nightshade, volunteer potatoes. Standard combination: S-metolachlor + terbuthylazine + mesotrione (e.g. Calaris, Camix). Check current product approvals before purchase — availability changes regularly. Apply within 48 hours of drilling; ensure soil is moist enough for activation within 7–10 days. AHDB maize weed control guide ↗.
Can I use nicosulfuron in all maize varieties?
Nicosulfuron is the primary post-emergence grass weed herbicide in maize, controlling couch grass, volunteer cereals, Digitaria and other grass weeds. Important: variety tolerance varies significantly. Standard grain maize and forage maize varieties are generally tolerant at recommended rates (30–45 g ai/ha). However: sweet corn varieties and some forage varieties have reduced tolerance and can show significant crop damage — bleaching, growth check, and yield loss. Always check the current AHDB/HGCA approved variety list for nicosulfuron sensitivity ratings before application. Additional precautions: do not apply when maize is under temperature stress (cold nights below 8–10°C); observe the mandatory minimum interval between nicosulfuron and organophosphate or carbamate insecticide applications (typically 14 days — check label); do not exceed label dose rate. Where variety tolerance is uncertain, a test strip at reduced rate is advisable. See the maize silage quality 2028 article for variety selection context.
What weed control options are available for organic maize?
Organic maize weed management relies on cultural and mechanical tools only — no synthetic herbicides. Key options: (1) Stale seedbed — prepare 3–4 weeks before drilling; allow weed flush; shallow flame weed or cultivate to kill emerged weeds immediately before drilling. (2) Inter-row cultivation — tined or rotary inter-row cultivator from V2 to V6; 4–5 cm depth between 75 cm rows; aim for 2–3 passes at 5–7 day intervals. (3) In-row thermal weeding (flaming) — band flamer passes along the crop row until V3 (crop tolerates short exposure above ground level at this stage); effective on small-seeded annual weeds; less effective on fat hen above 4-leaf stage. (4) Cover crop before drilling — rolled/crimped rye cover crop at drilling suppresses early weed flush; reduces inter-row cultivation passes needed. (5) Hand rogueing — essential for volunteer potato and persistent patches. The combination of stale seedbed + inter-row cultivation + in-row flaming can achieve adequate weed control in good seasons — challenging in wet years when field access is limited. See the cover crop mixtures guide.
How does inter-row cultivation compare with herbicide treatment in maize?
Inter-row cultivation vs. herbicide in maize: studies and commercial experience show that cultivation alone can achieve 80–90% weed control efficacy when weeds are small and conditions are good, but reliability drops significantly in wet seasons or where fat hen and nightshade populations are very dense. Integrated approach is most reliable: pre-emergence residual herbicide at drilling (reducing the weed population that cultivation must control) + one inter-row cultivation pass at V3–V4 (killing weeds escaped from the pre-em) reduces both herbicide expenditure and residual weed pressure relative to herbicide alone or cultivation alone. Economic comparison: the cost of a cultivation pass (tractor time, contractor rate) is typically comparable to a single post-em herbicide application; the breakeven is highly season-dependent. Key advantage of cultivation: no mode-of-action resistance risk; no label restrictions by soil type. Key disadvantage: time-sensitive, weather-dependent, requires appropriate row spacing. See the IPM entry for broader context.