Sow

Onion Establishment

Onion Establishment guide.

5 min read

Onion establishment methods: comparison

MethodTimingTarget pop.AdvantagesDisadvantages
Direct drilled (seed) Mar–Apr (spring onions: Feb–May) 60–90 plants/m² Lowest cost; large scale possible; good varieties available Slow establishment; weed competitive period extended; early drilling risk in cold soils
Transplanted (module-raised) May–Jun 50–70 plants/m² Rapid establishment; less weed pressure; earlier harvest window Higher cost; requires transplanting machinery or labour; transplant check possible
Transplanted (bare-root sets) Mar–May 40–60 plants/m² Rapid growth; vernalised bulbs; good in cool spring soils Bolting risk if too cold before transplanting; imported infection risk; narrower variety range
Multiseeded module Apr–Jun 60–90 plants/m² (clusters) Precision placement; good establishment; low cost vs single modules Row structure affects harvesting; variety-specific performance; niche market requirements

Step-by-step onion establishment programme

  1. 1

    Prepare a fine, firm, level seedbed with optimal drainage before drilling or transplanting

    Onion establishment is highly sensitive to seedbed quality — more so than most combinable crops. Requirements: fine, friable structure with clods <25 mm; firm (to allow precision drilling depth control and good seed-soil contact); level (for uniform irrigation distribution); and free-draining (onion seedlings are extremely sensitive to waterlogging in the first 6 weeks). Typical seedbed preparation: autumn plough on lighter soils, consolidated over winter; spring cultivation with power harrow or combination drill to produce fine tilth. On heavy soils, land drainage should be addressed before onion cropping — persistent waterlogging after drilling causes rapid stand losses and promotes disease. Avoid pan formation during cultivation — these compact layers can cause waterlogging below an apparently friable surface.

  2. 2

    Calibrate drilling depth and spacing to target plant population

    For direct-drilled onions, precise seed placement is critical for achieving target plant populations and row uniformity. Target depth: 10–15 mm — shallower than cereals to allow rapid emergence in cool spring soils, but deep enough for good seed-soil contact. Seed spacing within the row: 10–15 mm for salad onions; 15–25 mm for bulb onions. Row spacing: 250–375 mm depending on variety, market specification and harvesting equipment width. Calibrate the drill with the seed lot to be used — onion seed varies significantly in weight and fill between lots, and handbook calibration factors should not be substituted for actual calibration at the target depth and spacing. Target plant populations: 60–80 plants/m² for most fresh market bulb onions; 40–60 plants/m² for large bulb processing markets; 70–100 plants/m² for small pickling onions.

  3. 3

    Apply pre-emergence herbicides immediately after drilling on moist soil

    Weed control in onions is critical — the onion seedling is slow-growing and non-competitive for 6–8 weeks after emergence, allowing weeds to establish rapidly and cause serious losses. The pre-emergence herbicide programme must be applied immediately after drilling on a moist seedbed before the soil surface dries and cracks. Currently available pre-emergence options in UK onions include pendimethalin (at approved dosages for onions — check current registration) and propachlor. Post-emergence options are increasingly limited — contact herbicides (ioxynil, bromoxynil) for young broad-leaved weeds from GS12 onwards. The onion herbicide toolkit is one of the most restricted of any UK crop — any new minor use authorisations or label amendments should be confirmed before each season.

  4. 4

    Irrigate at drilling and during early establishment to support emergence and prevent crusting

    Onion seed has limited germination energy reserve — inconsistent moisture at drilling leads to staggered emergence and uneven stands. If soil moisture is borderline at drilling, apply 15–25 mm of irrigation immediately after drilling to wet the seedbed to 50 mm depth. Irrigation also prevents surface capping/crusting on silty or medium soils — a capped soil surface can significantly delay or prevent emergence, particularly in a dry spell following drilling. During early post-emergence growth (to GS12), maintain adequate soil moisture — visible wilting at the cotyledon stage is costly. Overhead irrigation (rain gun or boom) is appropriate at this stage; drip tape does not provide the pre-emergence surface coverage needed. For transplanted onions, apply overhead irrigation at transplanting to settle root-soil contact and reduce transplant check.

  5. 5

    Scout for allium leaf miner and onion fly from crop emergence and apply protective treatments at flight timing

    Allium leaf miner (Phytomyza gymnostoma) spring flight (March–May) and onion fly (Delia antiqua) first generation coincide with the onion crop establishment period. Both pests can cause severe stand losses in young crops — allium leaf miner through mining and secondary rot entry; onion fly through larval damage to the developing bulb. Scout from GS11 (cotyledon stage) and apply approved insecticides at the onset of confirmed flight activity. With neonicotinoid seed treatments largely no longer available, the programme relies on pyrethroid sprays at flight times. Crop covers (fleece or insect-proof mesh) before pest flight can be highly effective if the crop is covered before the first flight. Time covers removal to after the main flight period ends. For more detail see the <a href="/guides/onion-weed-pest-management">onion weed and pest management guide</a>.

Early weed control: the establishment imperative

The 6-week period from drilling to the four-leaf stage is the critical weed control window in onions. A pre-emergence herbicide programme applied immediately after drilling is the foundation — then closely monitored for weed escapes that require contact post-emergence herbicide. See the onion weed and pest management guide for the full herbicide programme and pest management approach.

Frequently asked questions

What is the optimal soil temperature for onion seed germination?
Onion seed germinates across a wide temperature range (2–32°C) but the optimal range is 10–25°C with fastest and most uniform germination at 16–20°C. At temperatures below 7°C, germination slows dramatically and risk of seed rot from soilborne pathogens (Pythium, Fusarium) increases significantly. In UK spring conditions, April drilling (when soil temperatures typically reach 7–10°C) is generally preferable to March drilling in most seasons — the risk reduction from slightly later drilling usually outweighs the 5–7 day extension of the growing season from early drilling. A soil thermometer at 50–75 mm depth is the best guide to drilling readiness. Where early drilling is essential (to meet harvest windows), seed treatments containing iprodione or fludioxonil provide some protection against seedling damping-off in cold soils. See the growing degree days glossary entry for accumulating heat units from drilling to emergence.
Why are onion seedlings particularly vulnerable to weed competition?
Onion seedlings are extremely poor competitors during the early establishment phase for three reasons: (1) Slow germination and emergence — onion cotyledons take 14–21 days to emerge compared to 5–10 days for most cereal weeds; (2) Upright leaf architecture — onion leaves grow vertically, providing minimal shading of the soil and leaving the inter-row space open to weed establishment; (3) Slow initial growth rate — onion seedlings are small and grow slowly until 3–4 true leaves, allowing weeds established in the emergence gap to overtop them. Established weeds in an onion crop are very difficult to remove — the limited herbicide toolkit offers no broad-spectrum post-emergence option for established weeds. Prevention (pre-emergence programme + stale seedbed) is far more effective than cure. For more context see the onion weed and pest management guide.
Should I use transplanted modules or direct-drilled seed for my onion enterprise?
The choice between direct-drilled seed and transplanted modules depends on: (1) Scale — direct drilling is typically more cost-effective at large scale (>50 ha); transplanting is feasible at smaller scales; (2) Weed history — where weed pressure is severe, transplanting gives the crop a 4–6 week head start that significantly reduces competitive pressure; (3) Market — fresh retail market specifications often favour the more uniform bulb size achievable with transplanted crops; (4) Season length — transplanted crops can achieve harvest windows 3–4 weeks earlier than direct-drilled crops, which may allow a second crop or improve logistics; (5) Economics — transplant costs (including raising modules or buying in plug plants) are typically £800–1,500/ha additional cost vs direct drilling. See the AHDB Horticulture onion establishment research for the comparative evidence base.
How do I manage bolting risk in transplanted onions?
Bolting — the premature production of a flowering stalk — is triggered in onions by a period of cold temperatures (<10°C for 1–4 weeks) after the plant has exceeded a minimum leaf number (typically 3–4 true leaves, depending on variety). Bare-root transplanted sets (pre-chilled before transplanting) carry a higher bolting risk than module-raised transplants. Risk management: (1) Variety choice — choose varieties with high bolting resistance ratings for your sowing/transplanting window; (2) Transplanting timing — avoid transplanting when 10-day forecast shows extended cold period below 7°C; (3) Plant size at transplanting — modules that are too large (>4 true leaves) have already met the vernalisation requirement and will bolt more easily; (4) Bare-root set quality — inspect for signs of bolting initiation (developing scape) before planting. AHDB Horticulture ↗ publishes variety bolting ratings for commercial varieties.
What irrigation volume does a direct-drilled onion crop require from drilling to harvest?
Onion water requirements are significant and consistent throughout the growing season. Typical crop water use: 300–450 mm total from drilling to harvest, depending on season length and weather. Key irrigation windows: (1) Pre-emergence: 15–25 mm if soil moisture is borderline; (2) Establishment to 4-leaf: maintain adequate moisture — 15–25 mm per application as needed; (3) Bulb initiation and filling: the most water-sensitive period — maintain soil moisture at 50–75% field capacity throughout; (4) Ripening: gradually reduce irrigation from 3–4 weeks before intended harvest to promote skin set and skin strength. For more on irrigation scheduling see the available water capacity glossary entry. Irrigation in onions also reduces common scab infection when applied at tuber set timing analogous to potatoes.