Harvest maturity indicators
Five-step harvest and storage programme
- 1 Assess maturity and schedule lifting
Begin assessing harvest maturity from late July for autumn-stored crops. Target the 80–90% neck fall threshold as your primary trigger — lifting too early leaves bulbs with green, uncollapsed necks that are highly susceptible to neck rot (Botrytis allii). Walk the field in several transects, counting neck fall percentage. Check skin condition by peeling back the outermost scale: if the underlying scale is still fleshy and moist, the skin set is incomplete. In dry seasons, maturity can advance rapidly — check every 3–4 days once 60% neck fall is reached.
- 2 Lift and windrow for field drying
Lift onions with an undercutter or onion lifter set to run just below root depth, then leave in windrows on the soil surface for 7–14 days if weather permits. Field drying in windrows — with tops of one row covering the bulbs of the next to prevent solar scalding — completes the initial drying process cheaply. Turn windrows once if the topside is drying faster than the underside. Field drying is only viable in a dry spell — in wet conditions, harvest directly into store and begin forced-air curing immediately. Avoid harvesting in wet or dewy conditions if possible: surface moisture at intake dramatically increases disease risk.
- 3 Intake and begin curing
Move bulbs into store and begin curing with forced-warm air (25–30 °C, relative humidity below 70%, 3–5 air changes per hour) as soon as possible after lifting in wet conditions, or after field drying in good conditions. The curing period seals the cut neck, dries and toughens the outer skin scales, and allows surface damage to callus over. Curing duration: 2–3 weeks for well-field-dried crops; 3–5 weeks for crops lifted green or in wet conditions. Monitor neck condition daily — when the neck is completely dry and papery and the outer 2–3 scales are tight, curing is complete.
- 4 Cool the store to long-term temperature
After curing, progressively cool the store to 0–2 °C over 3–4 weeks. Rapid cooling risks chilling injury and condensation on the outer scales — both reduce shelf life and increase disease susceptibility. Target cooling rate: 1–2 °C per week until store temperature reaches 0–2 °C. Maintain relative humidity at 65–70% throughout the cooling period and in long-term storage. Install calibrated temperature and RH sensors at multiple heights in the store and check readings at least daily. At 0–2 °C and 65–70% RH, well-cured onions can be held until March–April without significant deterioration.
- 5 Monitor, grade and market through winter
Inspect the store every 1–2 weeks for disease development. Walk the bulk in several places and dig to the core — neck rot starts from the top, basal plate rot from the bottom. Remove infected bulbs promptly to prevent spread. When demand requires, warm loads slowly (1–2 °C per day) before bringing to the grading shed — rapid temperature change causes surface condensation and marking. Grade to market specification, rejecting diseased, double, sprouting and split bulbs. Monitor storage losses through winter — total losses above 5–8% by January suggest an active problem requiring investigation.
Store hygiene and preparation
Clean the store thoroughly between seasons. Remove all organic debris (old skins, soil, cull onions) that harbour disease inoculum — particularly Botrytis and Fusarium spores. Wash floors and walls with water and allow to dry before intake. Check and calibrate all temperature and RH sensors, clean fan inlets and outlets, and inspect duct work for blockages and bird/rodent access points. Refrigeration units should be serviced and leak-tested before the harvest period.
See the onion storage management 2027 article for the 2027 season disease context, the onion agronomy guide for in-season disease management, and the harvest maturity glossary entry for the broader maturity science.