The case for on-farm storage
Knowing how to cool grain in store and understanding grain conditioning, grain storage temperature guide targets, grain storage moisture targets, grain aeration systems and the risk of mycotoxins in stored grain are all essential for on-farm storage success. On-farm grain storage adds flexibility in selling — grain sold at harvest typically attracts the lowest seasonal price. Storing to sell in winter or spring captures the carry, but only if grain is managed correctly from the moment it leaves the combine. Poor management erodes that margin through drying costs, quality losses, or outright condemnation. The AHDB grain storage guide ↗ is the definitive UK reference for all aspects of storage management.
Three factors determine whether stored grain maintains quality: moisture, temperature and time. Control two of these — moisture below safe threshold and temperature below 15 °C — and grain will store safely for months. Let either rise, and deterioration follows.
Intake moisture and drying
The most important decision at harvest is whether incoming grain needs drying before storage. Safe storage moisture for wheat and barley is 14.5 % for up to 6 months, 14.0 % for longer. Maize requires 14 %. Grain above these thresholds must be dried or moved quickly.
Cooling: the most cost-effective intervention
Cooling grain to below 15 °C within the first 2–4 weeks of storage prevents insect breeding and slows all microbial activity. Night air in late summer and autumn is typically cool enough to ventilate grain if used correctly — fans run for 4–6 hours overnight, pulling cool air through floor ducting. Monitor grain temperature with probes at multiple depths; there should be no zone warmer than 2 °C above ambient after cooling. AHDB cooling guidance ↗ covers fan sizing, duct design and run times.
Pest monitoring protocol
Monitoring frequency: at intake, monthly during storage, and before every sale. Place pitfall traps (grain insects) in the base of the pile or on the floor in spring when temperatures rise above 15 °C — this is when insect populations explode. AHDB pest identification ↗ covers grain weevil, rust-red flour beetle, and psocid identification with photographic guides. Approved grain protectant insecticides are applied as a surface treatment on stored grain or as a structural store treatment before harvest. HSE pesticide database ↗ lists approved storage products.
Store hygiene before harvest
A contaminated store from the previous year re-infests incoming grain immediately. Before harvest, completely empty the store, vacuum and sweep walls, floors and ducting, and treat with an approved grain store insecticide. Timing matters — treat at least 2–4 weeks before filling to allow product to act on overwintering populations. See the cereal harvest management guide for the complete pre-harvest and harvest logistics sequence.