Season

Potato harvest: storing the crop well

Curing, temperature and airflow in the first weeks after lifting.

12 Sept 2026 · Northern hemisphere · University of Maine Extension ↗

The first 14 days set the store's fate

More potato crop is lost in the first two weeks after lifting than at any later point in storage. The period from harvest to stable long-term storage temperature is when curing happens, field heat is removed, wounds heal and disease status is established. Getting this window right determines whether a store of 1,000 tonnes arrives at market in condition or arrives with losses running into tens of thousands of pounds.

The University of Maine Cooperative Extension storage management guide ↗ remains the most comprehensive open-access reference for potato storage across a wide range of climates and market types. Its curing and cooling protocols are widely adopted as industry benchmarks beyond North America.

Curing: the wound-healing phase

Curing creates wound periderm — a new layer of skin cells that forms over cuts, pressure bruises and split stems from the harvester. Without it, every wound is an open pathway for bacterial and fungal decay. The parameters are precise:

  • Temperature: 10–15 °C (slightly warmer encourages faster periderm formation; cooler slows it).
  • Humidity: 95–98 % relative humidity — high enough to prevent moisture loss from the wound, not so high that free water condenses on tuber surfaces.
  • Duration: 10–14 days for most ware and processing varieties; seed crops may be cured more briefly at slightly lower temperatures.
  • Airflow: Gentle recirculation to maintain temperature uniformity, not active cooling. The objective is to hold temperature, not reduce it.

Cooling: avoiding the condensation trap

After curing, the store temperature needs to reach its long-term target — typically 4–5 °C for ware, above 8 °C for processing. The critical constraint is rate of cooling. The standard recommendation is no faster than 0.5 °C per day. Cooling faster than this creates a temperature differential between the outer layer of the pile and the core: moisture migrates outward and condenses on cooler surface tubers. Surface condensation is the primary trigger for Pectobacterium soft rot outbreaks.

For processing varieties susceptible to cold-induced sweetening (elevated reducing sugars), the cooling phase is a balance between store temperature, reconditioning flexibility and frying colour specification. AHDB potato storage management ↗ covers the reconditioning protocols for processing crops held too cold.

Airflow and store management

Airflow serves three functions: removing field heat during the cooling phase, providing uniform temperature across the pile during storage, and removing the CO₂ and moisture produced by tuber respiration. Under-fan capacity is a common store limitation — the target is 0.07–0.1 m³ of air per minute per tonne of potatoes through the pile. Inadequate fan capacity means slow field heat removal and hot spots that become rot foci.

Temperature sensors at multiple points in the pile — especially in the centre and at the intake end — are essential for managing airflow effectively. A single temperature probe at the fan outlet does not represent pile conditions. CropMonitor ↗ provides current in-season disease pressure data that should inform intake quality assessment before storage decisions are made.

Intake assessment

What goes in determines what comes out. Bruised, blighted, or rotationally damaged tubers stored with sound potatoes introduce decay inoculum and create local hot spots. A robust intake assessment protocol — sampling for bruise level, blight symptoms, green percentage and skin finish — is the most effective store management tool available. AHDB potato quality and harvesting guidance ↗ sets out intake sampling and grading protocols used by the major packers and processors.

Frequently asked questions

What is curing and why does it matter for potato storage?
Curing is the post-harvest conditioning period during which freshly lifted potatoes form a new, thickened skin layer (wound periderm) over any cuts or bruises from lifting. Curing at 10–15 °C with high humidity (95–98 % RH) for 10–14 days dramatically reduces water loss, decay entry through wounds and susceptibility to storage diseases. The University of Maine potato storage guide ↗ is the definitive open-access reference for curing parameters across varieties and intended markets.
What temperature should potatoes be stored at?
Target temperature depends on end use. Ware potatoes (fresh market) are typically stored at 4–5 °C after curing. Processing (crisp/chip) varieties must be held above 8–10 °C to prevent cold-induced sweetening (sugar accumulation that causes unacceptable browning during frying). Seed potatoes are often held at 3–4 °C to suppress sprouting. AHDB potato storage guidance ↗ covers UK-specific recommendations by market and variety type.
How important is airflow in potato stores?
Airflow is critical for temperature uniformity and removing field heat, carbon dioxide and moisture from respiration. Inadequate airflow creates hot spots and condensation that accelerate decay. The general rule is 0.07–0.1 m³/min per tonne of potatoes through the pile — AHDB store management guidance ↗ provides fan sizing and duct design recommendations. Condensation on tubers is the leading cause of bacterial soft rot outbreaks in store.
What diseases most commonly develop in potato stores?
Pectobacterium spp. (bacterial soft rot) is the most common and economically significant storage disease — it thrives in free moisture and wounds. Phytophthora infestans (late blight) can continue to develop in store if infected tubers are not identified and removed at intake. Dry rot (Fusarium spp.) enters through wounds and spreads slowly. CropMonitor ↗ tracks in-season disease levels that indicate likely carry-over into store.
How should I manage the transition from curing to long-term storage temperature?
Cool the store gradually — no faster than 0.5 °C per day — to avoid condensation forming on tuber surfaces as they cool. Rapid cooling creates a temperature gradient between the outer pile and core, causing moisture migration and skin condensation. The University of Maine guide ↗ recommends a step-down schedule: hold at 10 °C for two weeks post-curing, then drop 0.5 °C per day to target temperature.
What should I check at intake to protect long-term storage?
Inspect for: bruise levels (especially shatter bruise from excessive drop height during harvesting or boxing), green tubers (solanine development — unmarketable), late blight symptoms (brown internal lesions), rots and skin finish. AHDB potato quality guidance ↗ sets out intake grading protocols. Any significant blight presence at intake is a serious risk to the whole store — isolate affected lots if possible.