Field capacity

FC

The amount of water held in a soil after free drainage has ceased — the upper limit of plant-available water.

After heavy rain or irrigation, gravitational water drains away within 24–48 hours on most soils. The water that remains held against gravity by capillary and adsorption forces is the field capacity — typically expressed as % by volume or mm/m depth. Sandy soils reach field capacity at 10–15% moisture; clay loams at 35–45%. Field capacity is the starting point for irrigation scheduling — deficit below FC is the soil moisture deficit (SMD).

Irrigation and soil water data: see AHDB irrigation guide and Cranfield NSRI.

Field capacity by soil type

Sand
10–15%
Sandy loam
15–25%
Silt loam
25–35%
Clay loam
35–45%
0%10%20%30%40%50%

Volumetric water content ranges. Source: AHDB.

Why it matters

FC determines how much water sits available between rains.

Low-FC soils (sands and light loams) hold very little water after drainage, meaning crops on these soils need more frequent irrigation to avoid stress. High-FC soils (silts and clays) store more water but can also be slower to drain, risking waterlogging if over-irrigated.

Understanding your soil's field capacity is the first step in any irrigation scheduling system — it sets the ceiling for how much water you can bank in the profile.

How to measure it

Gravimetric method or texture-based estimation.

Gravimetric: weigh a saturated, freely drained soil sample, oven-dry at 105 °C, then reweigh. FC (% w/w) = (wet weight - dry weight) / dry weight x 100. Convert to volumetric by multiplying by bulk density.

Or estimate from soil texture using published pedotransfer tables from Cranfield NSRI. These tables predict FC from sand, silt and clay percentages with reasonable accuracy for irrigation planning.

FAQ

Frequently asked questions

What is field capacity in simple terms?
Field capacity is the amount of water a soil holds after excess water has drained away under gravity — typically 24–48 hours after heavy rain or irrigation. Think of it as the soil's "full but not waterlogged" point. At field capacity, the large pores have emptied of free water but the smaller pores are still holding water that plant roots can access.
How do you measure field capacity?
The standard method is gravimetric: saturate a soil sample, let it drain for 48 hours under cover (to prevent evaporation), then weigh it, oven-dry at 105 °C for 24 hours, and reweigh. Field capacity (% by weight) = (wet weight − dry weight) / dry weight × 100. Alternatively, you can estimate FC from soil texture using published pedotransfer functions from Cranfield NSRI or USDA lookup tables.
Why does field capacity matter for irrigation scheduling?
Field capacity sets the upper limit of water your soil can store for crop use. If you irrigate beyond FC, the extra water simply drains below the root zone — wasting water, energy and potentially leaching nitrates. Knowing your soil's FC lets you calculate available water capacity (FC minus permanent wilting point) and schedule irrigation to refill the profile without over-watering.
What is the difference between field capacity and permanent wilting point?
Field capacity is the upper limit of plant-available water — the most the soil can hold against gravity. Permanent wilting point (PWP) is the lower limit — the moisture content at which plants can no longer extract water and will wilt irreversibly. The difference between FC and PWP is the available water capacity (AWC), which is the water reservoir your crops actually draw from.
How does organic matter affect field capacity?
Organic matter improves soil structure and increases the number and size of micropores that hold water at field capacity. Research shows that for every 1 % increase in soil organic matter, a mineral soil can hold roughly 1.5–2 % more water by volume at FC. Building organic matter through cover crops, manure and reduced tillage is one of the best long-term strategies to increase water-holding capacity.
What are typical field capacity values by soil type?
Sand: 10–15 % (v/v); sandy loam: 15–25 %; silt loam: 25–35 %; clay loam: 35–45 %. These are broad ranges — actual values depend on structure, organic matter, compaction and stone content. The AHDB irrigation guide and Cranfield NSRI databases provide UK-specific values that are more precise for local conditions.