Seed

Plant population

The number of plants growing per unit of area.

Target plant population (plants/m²) drives the seed rate calculation. It varies by crop, variety, sowing date and soil conditions. Too few plants reduce yield potential; too many increase lodging risk and disease pressure. Population = 10,000 / (row spacing m × in-row spacing m).

Target populations by crop

CropTarget (typical)Acceptable rangeNotes
Winter wheat (Oct drill) 275–325/m² 250–350/m² Higher population compensates for late-tiller loss in early-drilled crops
Winter wheat (Nov+ drill) 325–375/m² 300–400/m² Late drilling reduces tillering time — higher seed rate needed
Winter barley (2-row) 275–325/m² 250–350/m² Lower tillering capacity than wheat — population matters more
Spring barley 325–375/m² 300–400/m² Short growing season — less time to compensate with tillering
Winter OSR (hybrid) 25–40/m² 20–45/m² Highly compensatory via branching — population less critical than even distribution
Maize 95–105k/ha 90–110k/ha No tillering — plant population directly equals ear number
Potato (ware) 38–42k/ha 35–45k/ha Tuber set depends on seed rate, cut weight and seed spacing

Targets indicative — always calculate for your specific TGW, germination and field emergence. Sources: AHDB Wheat Growth Guide, AHDB Barley Establishment Guide.

From seed rate to plant population

Plant population is the output of the seed rate calculation. To hit a target plant population, you need to know: the TGW of your seed lot (determines how many seeds are in each kilogram); the germination percentage (from the seed label); and the expected field emergence factor (based on seedbed conditions, drilling depth and pest pressure). The formula:

seed rate (kg/ha) = target plants/m² × TGW (g) ÷ 100 ÷ germination % ÷ field emergence %

Use the TGW glossary entry, germination rate entry and field emergence entry to understand each variable. The FarmTheGuide seed rate calculator works through the calculation interactively.

Assessing and responding to shortfalls

Count the stand at GS14 (first leaf fully emerged). Compare to your target. If the count is 10–15% below target, tillering can generally compensate in wheat and barley — no action is needed. If the count is more than 25% below target across large uniform areas, assess whether re-drilling is economically justified. Re-drill decisions must factor in: the drilling date (later drilling reduces compensating tiller potential); whether the shortfall is uniform or patchy (patchy shortfalls typically self-correct more than uniform ones); and the cost of re-drilling vs. expected yield penalty.

The wheat establishment guide covers the full stand assessment protocol, including when to re-drill and when to leave the crop. For maize, the maize establishment guide covers the more critical V3–V4 population check and re-drilling thresholds.

Frequently asked questions

How do I convert between plants/m² and plants/ha?
Plants/m² × 10,000 = plants/ha. This conversion is used between the seed rate calculation (which uses plants/m²) and field-scale population assessments. For row crops like maize and potatoes, populations are commonly expressed as thousand plants per hectare (k/ha) — so 95,000 plants/ha = 95k/ha. The seed rate glossary entry shows where plant population sits in the seed rate formula. For reference: a seed rate of 300 seeds/m² on 12.5 cm row spacing means one seed every 2.7 cm in the row.
Why do target populations differ by drilling date?
Drilling date changes the crop's opportunity to tiller. Early-drilled wheat (September–October) has more time and warmth for tiller development — a lower seed rate is acceptable because each plant produces more tillers. Late-drilled wheat (November–December) has less time to tiller before temperatures fall below the threshold for growth, so more plants are needed to achieve the target ear number. AHDB Wheat Growth Guide ↗ shows the population-to-drilling-date relationship, with recommended plant populations and corresponding seed rates for each month of drilling from early September to December. See the tillering entry and wheat establishment guide.
What is the relationship between plant population and ear number?
In cereals, ear number/m² = plant population × tillers per plant. At high seed rates, each plant has fewer tillers; at low seed rates, each plant has more. The agronomic target is always ear number — typically 500–700 ears/m² for winter wheat. Below ~450 ears/m², significant yield is lost regardless of other inputs. Above ~800 ears/m², lodging and disease risk increase without proportional yield gain. AHDB guidance ↗ shows the yield response curve to ear number across a range of UK environments. Counting ears at GS61–65 provides the best late-season yield estimate before harvest.
How do I count plant population in the field?
Count plants after full emergence (GS14 — fully emerged seedlings) at five or more randomly chosen sites across the field. Use a quadrat of known area (0.25 m² = 0.5 m × 0.5 m, or a fixed row length: 0.5 m of row ÷ row spacing in metres = plants/m²). Average the counts. Compare to your target population — within 10–15% is acceptable. A significantly lower population across large areas warrants a re-drill assessment, but consider tillering capacity and drilling date before deciding. For maize, count is typically done at V3–V4 (3–4 fully expanded leaves) when re-drill decisions must be made. See the field emergence glossary entry for how population relates to emergence calculation.
Why does maize plant population directly determine yield whereas wheat is more flexible?
Maize has essentially no tillering capacity — each plant produces one or two cobs, and yield is almost directly proportional to plant population. A 10% reduction in maize population means approximately 10% reduction in yield potential, with no compensating mechanism. Winter wheat, by contrast, can produce between 1 and 8+ productive tillers per plant depending on conditions — a 10% population reduction is largely compensated by increased tiller numbers per plant. This is why maize seed rates are calculated with great precision (seeds per hectare) and monitored closely, while wheat seed rates have wider acceptable ranges. See the maize establishment guide for population management in maize.