Why grow maize under film
Maize requires approximately 1300–1500 growing degree days (base 10°C) from drilling to harvest maturity for forage. In many parts of the UK — particularly northern England, Wales and Scotland — accumulated GDD in a normal season falls short, resulting in immature crops with low starch content and poor feed value harvested late into deteriorating ground conditions.
Film (plastic mulch) laid over the drilled row raises soil temperature by 3–5°C in the critical establishment phase, accelerating germination and early growth. This translates to an additional 100–200 GDD over the season and allows drilling 2–4 weeks earlier than open-drilled maize. The combined effect is earlier maturity, higher dry matter content at harvest, improved starch levels and a wider harvest window before autumn rain. On marginal sites, film can be the difference between a successful crop and an expensive failure. See growing degree days glossary for calculation methods.
Soil temperature gain and GDD benefit
Under clear or degradable film, soil temperature at 5 cm depth is typically 3–5°C higher than bare soil during March–May. This accelerates germination from 14–21 days (open drilled) to 7–10 days (under film) and promotes faster root development. The GDD benefit is greatest in the first 6–8 weeks when the film is intact and ambient temperatures are lowest. Once the crop canopy closes, the film effect diminishes — which is why timely removal or degradation matters.
Marginal sites and the case for film
Film is most justified on sites above 150 m altitude, north of a line from the Severn to the Wash, or on heavy clay soils that warm slowly in spring. On these sites, open-drilled maize frequently fails to reach 30% dry matter at harvest, resulting in poor silage quality and soil damage from late harvesting. The AHDB maize guide ↗ provides regional suitability maps and variety recommendations.
Drilling techniques and applicator setup
Most UK film-maize is drilled using a Samco-type applicator ↗ that lays film and drills seed in a single pass. Key setup points: soil must be moist enough to anchor the film but not so wet that it smears; seed depth of 4–5 cm through pre-punched holes; film edges buried 5–8 cm to prevent wind lift; and row spacing typically 75 cm. Good applicator calibration and slow forward speed (5–7 km/h) are critical for consistent placement. Use the seed rate calculator to determine target populations.
Film degradation and microplastic concerns
Conventional PE film must be removed, collected and disposed of through approved waste contractors — an operation costing £50–100/ha in labour and disposal. Fragments left in the field accumulate as microplastics in the soil. Biodegradable alternatives (typically starch-PBAT blends certified to EN 17033) are designed to fragment and mineralise within one growing season, but real-world degradation varies with soil temperature, moisture, pH and microbial activity.
The environmental debate around maize film is intensifying. While the agronomic benefits on marginal sites are clear, the long-term soil health implications of repeated PE use, and the true degradation pathway of biodegradable films, are subjects of ongoing research by NIAB and the Maize Growers Association. Good practice includes selecting biodegradable film where proven, ensuring complete PE removal, and maintaining detailed records for farm assurance schemes. See also maize harvest timing for guidance on optimising harvest date.