Grow

Maize Nutrition Management

Maize Nutrition Management guide.

5 min read

Maize nutrient requirements

NutrientTypical requirementTimingCommon formsNotes
Nitrogen (N) 120–180 kg N/ha Pre-planting or at sowing Slurry, digestate, AN, UAN Maize is inefficient with late N; all N should be available at establishment
Phosphorus (P) 80–110 kg P₂O₅/ha Pre-planting incorporation TSP, MAP, slurry, digestate P essential for root development; responsive crop
Potassium (K) 160–220 kg K₂O/ha Pre-planting or split MOP (KCl), SOP (K₂SO₄), slurry Very high K offtake at whole-crop silage; use K index as guide
Sulphur (S) 20–40 kg SO₃/ha Pre-planting or at sowing Ammonium sulphate, SOP, gypsum Deficiency common on sandy soils; interveinal chlorosis diagnostic
Magnesium (Mg) 20–30 kg MgO/ha Pre-planting (if soil Mg low) Kieserite, dolomitic limestone, foliar Mg Deficiency worsened by high K; interveinal striping on older leaves
Zinc (Zn) 1–3 kg Zn/ha (foliar) Seedling stage (3–5 leaf) Foliar zinc sulphate or chelated Zn Zinc deficiency common on high-pH, high-P soils; white banding on leaves

Step-by-step nutrition management programme

  1. 1

    Soil test and calculate the nutrient requirement before planning applications

    Maize is a nutrient-hungry crop with specific requirements at each growth stage — and unlike cereals, maize receives most of its nutrition in a single pre-planting application. Soil test before each maize crop (or within the last two years) for pH, P index, K index and Mg index. Maize target soil pH is 6.2–6.8 — below this, nutrient availability drops rapidly. Calculate nitrogen requirement using the AHDB RB209 approach for maize: total N = crop requirement (typically 160–200 kg N/ha) minus soil nitrogen supply (SNS) minus organic manure N credit. The RB209 nutrient management guide for maize accounts for different yield targets (silage whole crop: 40–50 t DM/ha; grain maize: 8–10 t/ha) and adjusts recommendations accordingly. Always credit organic manure applications fully — maize is a primary recipient of slurry and digestate on livestock farms, and over-application of inorganic N on top of substantial manure inputs is both wasteful and environmentally damaging.

  2. 2

    Apply organic manures in autumn or spring to maximise nitrogen credit

    Maize is an excellent recipient crop for organic manures: slurry, FYM and digestate all supply significant quantities of available nitrogen, phosphorus and potassium alongside slower-release organic fractions. Application timing for organic manures should prioritise maximum nitrogen retention: spring applications (March–April, before or at planting) maximise the nitrogen credit from slurry because the risk of leaching and volatilisation is lower than autumn applications. Autumn applications on sandy soils in NVZs should be avoided — risk of nitrate leaching before planting is high and regulatory limits apply. Digestate from anaerobic digestion plants has a higher proportion of ammonium N (quick-release) than FYM, so similar handling and timing principles apply as for slurry. See the <a href="/glossary/nitrogen-use-efficiency">nitrogen use efficiency glossary entry</a> for the background on organic N mineralisation rates.

  3. 3

    Place starter fertiliser in or near the seedrow at drilling for early establishment

    Despite most maize nutrition being applied pre-planting, a starter fertiliser application placed in or near the seedrow at drilling (using a combined drill with fertiliser coulters) significantly improves early establishment, particularly in cold soils below 10°C. Starter fertiliser is typically a phosphorus-rich formulation (DAP, MAP or NP liquid) applied at low rate (20–30 kg P₂O₅/ha) — the phosphorus stimulates root development at the seedrow zone before the main root system has developed to access the broader soil nutrient pool. On cold soils (common in north and west UK), starter P at drilling can produce visible stand improvements of 3–5 plants/m² compared to no-starter controls. Zinc deficiency — common on high-pH soils — can also be addressed at drilling with a micro-granule zinc product in the seedrow.

  4. 4

    Monitor crops for sulphur, magnesium and zinc deficiency in early growth stages

    Early-season nutrient deficiencies (seedling to 8-leaf stage) are the most damaging in maize because they restrict root and canopy development during the critical establishment period. Sulphur deficiency appears as uniform yellowing of younger leaves — distinct from nitrogen deficiency (older leaves yellow first). Magnesium deficiency shows as interveinal striping on older leaves (purple or yellow between green veins). Zinc deficiency shows as distinctive white or pale yellow banding at the base of the youngest leaves (the white bud symptom). All three can be corrected by foliar application if identified before the 8-leaf stage: foliar zinc sulphate (0.5% solution), foliar magnesium sulphate (Epsom salts, 2% solution) or foliar sulphur fertiliser. The window for effective foliar correction is narrow — yield loss from deficiency during establishment is not fully recovered by late correction. See the <a href="/glossary/sulphur">sulphur glossary entry</a> and <a href="/glossary/magnesium">magnesium glossary entry</a> for diagnostic detail.

  5. 5

    Account for whole-crop silage nutrient offtake when planning future soil nutrition

    Whole-crop maize silage removes very large quantities of nutrients from the field — significantly more than grain harvest alone, because the entire above-ground biomass is harvested. A 45 t/ha whole-crop silage yield (as-harvested, 30% DM) removes approximately: 160–180 kg N/ha; 60–80 kg P₂O₅/ha; 200–240 kg K₂O/ha; 20–25 kg MgO/ha. These offtakes must be replaced in the rotation — either by applying corresponding amounts of imported fertiliser and/or organic manure in subsequent crops. Fields that have grown maize for multiple consecutive years without adequate nutrient replacement often show declining K and Mg soil indices, which will suppress yields and quality in subsequent crops. Track soil indices every two to three years on regular maize fields. See the <a href="/glossary/potassium">potassium glossary entry</a> for the K index management framework.

Maize and the whole-farm nutrient cycle

On mixed farms with livestock, maize is often the primary recipient of slurry and digestate applications — and the calculation of organic manure credits is essential to avoid both under-supply (affecting yield) and over-supply (regulatory non-compliance and environmental loss). The RB209 nutrient management guide for maize provides detailed N availability factors for different organic manure types, application methods and soil types.

The nitrogen use efficiency of maize tends to be lower than wheat because pre-planting N applications are vulnerable to leaching before the crop establishes a significant root system. Improving NUE in maize is therefore particularly important on light soils — through use of slow-release or coated N products, by increasing organic matter to improve mineralisation, and by split-applying inorganic N at sowing and as a side-dress application. See also the leaching glossary entry for the nitrate movement risk context.

Frequently asked questions

How much nitrogen does maize need compared to wheat?
Maize has a lower total nitrogen requirement than high-yielding winter wheat on an equivalent area basis: wheat typically requires 180–220 kg N/ha (depending on yield target and SNS); maize requires 120–180 kg N/ha. However, maize absorbs its nitrogen much faster during the rapid growth phase (June–August) and is less efficient at recovering late-season N applications. The key differences: (1) maize receives virtually all its N in a single pre-planting application, whereas wheat splits N across three timings; (2) maize relies heavily on soil mineralisation to supply additional N during rapid growth — this is why soil organic matter and microbial activity are important for maize; (3) maize on light soils in high-rainfall regions has higher leaching risk than wheat. See the nitrogen use efficiency glossary entry for the efficiency comparison, and the nitrogen fertiliser market update for current N product costs.
Why is potassium particularly important for whole-crop maize silage?
Whole-crop maize silage removes the entire above-ground biomass — stem, leaves and cob — rather than just the grain. A grain-only harvest would remove perhaps 60–80 kg K₂O/ha; a whole-crop silage harvest removes 200–240 kg K₂O/ha. This means that continuous whole-crop maize without adequate K replacement can deplete soil K reserves rapidly, lowering the K index and reducing yields in subsequent crops. K is also directly related to maize dry matter accumulation and starch content in the grain — K-deficient crops tend to have lower DM percentages at harvest and poorer silage quality. The classic K deficiency symptom in maize is leaf edge scorch (marginal necrosis) on older leaves. See the potassium glossary entry for the K index management framework and the maize dry matter forecast 2028 for DM management context.
Can digestate and slurry fully replace inorganic fertiliser for maize?
In principle, yes — but in practice it depends on the available nutrient content and application timing of the organic materials. Digestate and cattle slurry can both supply sufficient N, P and K for a maize crop if applied at the right rate and at the right time: spring applications (March–April) of slurry at 20–25 m³/ha supply approximately 50–80 kg available N/ha (depending on dry matter content and application method), 40–60 kg P₂O₅/ha and 80–120 kg K₂O/ha from a single application. This is typically insufficient as a sole nitrogen source and is commonly supplemented with 60–100 kg N/ha of inorganic N. Trailing shoe or injected slurry applications have higher N availability than splash-plate applications (40–50% vs 20–25% of total N). RB209 provides slurry N availability factors that must be applied when calculating the inorganic supplement required. Always cross-check against regulatory N limits (NVZ rules, organic N cap of 170 kg N/ha in NVZs).
What are the symptoms of sulphur deficiency in maize and how is it corrected?
Sulphur deficiency in maize presents as uniform yellowing of younger leaves — the chlorosis starts in the youngest leaves first (unlike N deficiency, which starts in the oldest). In severe cases, young leaves emerge pale yellow or white. Sulphur is a component of the amino acids cysteine and methionine, so deficiency impairs protein synthesis, directly reducing yield and grain quality. In maize, S deficiency is most common on: sandy soils with low organic matter; soils with high rainfall and leaching risk; and fields remote from industrial sulphur deposition. Correction: foliar sulphur fertiliser (ammonium sulphate or sulphate formulations) applied at the 4–6 leaf stage is effective if identified early. Pre-planting applications of sulphur fertiliser (SOP, ammonium sulphate, gypsum) are more reliable as a preventative measure where deficiency is historically observed. See the sulphur glossary entry for UK deficiency mapping context.
How does soil pH affect maize nutrient availability?
Maize is sensitive to low soil pH — the target range is 6.2–6.8. Below pH 6.0, several critical nutrient availability issues develop: (1) Phosphorus availability declines sharply (P becomes locked up as iron and aluminium phosphates at low pH); (2) Aluminium and manganese toxicity can occur — both are more soluble at low pH and can reach phytotoxic concentrations in acid soils; (3) Zinc availability paradoxically increases at low pH, but is reduced at high pH (above 7.0). Maize grown on acid soils below pH 5.8 typically shows stunted roots, poor establishment and significant yield loss that cannot be corrected by fertiliser alone. Liming to the target pH range is the most effective single nutritional intervention on acid soils. See the liming and soil pH management guide and the soil pH glossary entry for the detailed nutrient availability relationships.